Quick Reply
Search this Thread
Lab Assistant
Original Poster
#1 Old 17th Jul 2012 at 10:55 AM Last edited by HugeLunatic : 1st Apr 2015 at 1:36 PM.
Default Guide: Two Graphics Cards? How to make Sims stop using the integrated one.
I have used about 30 hours these last weeks, on trying to get my Sims 3 game to run. It has been crashing within the first half an hour of gameplay
I've been trying to analyse the crashlogs, and finally i came down to one problem. "Insuficcient graphics capability: Upgrade your graphicscard or get it checked out for instablity".

And i didn't quite understand it, because i do have two graphicscards in my computer. An integrated (Intel HD) and another (NVIDIA). So i searched the internet and came up with this solution, and since it wasn't easy to find, I'll share it with you (:

Guide to make your computer use another graphicscard (For NVIDIA at least.)

Step 1.
Search for the control panel of your second graphics card. (In my case i type Nvidia)


Step 2:
Choose "Manage 3D Settings."


Step 3:
Choose "Program Settings"


Step 4:
Press add, and find TS3W
(This is found here:
32-bit Windows: C:\Program Files\Electronic Arts\The Sims 3\Game\Bin
64-bit Windows: C:\Program Files (x86)\Electronic Arts\The Sims 3\Game\Bin)
Source: http://simswiki.info/wiki.php?title...Prevention/TS3W

Step 5:
Notice how the computer has selected the integrated graphics card as the global setting. Change this to the right card (In this case the High Performance NVIDIA Processor)


Step 6:
Done (: Play your game.


Optional:
If you want to make sure that it runs correctly - Add a tray icon under "Desktop" -> "Display GPU activity icon in notification area"

Then you will get an icon looking like this:

(It will be in greytones when not using the card, and in colors when a program is using it)

Then when you open Sims 3 you can be able to press that tray icon and it will look like this.


Please take in mind that this is not the whole solution to the crashes. Mine doesn't crash as often anymore, but crashes can still occur.

I hope this will help someone (If this can help just one person i would be happy) (: I can't help with your specific graphics crash, but there will probaly be a solution to this aswell. Keep looking, or try if there is a similiar option on your graphics card.

Happy Simming.
Screenshots
Advertisement
Be like the 22nd elephant with heated value in space, bark!
retired moderator
#2 Old 18th Jul 2012 at 12:17 AM Last edited by HugeLunatic : 3rd Apr 2015 at 1:52 AM.
This is most useful, Ingefaer- thank you!

@everyone else- Please post here if you've tried this and it works, or if you have any questions.

I will choose a path that's clear- I will choose free will
-RUSH- -RADIO- -RADIO- -EON- -ARCHIVES-
Simpeople and Me Archive- 11Dots Archive- My Sims World Archive- Adele Archive- Sims 1 Archive
Please send me a message if you would like a SimsFileShare account, I can send you an invite!
Theorist
#3 Old 11th Aug 2012 at 3:36 PM Last edited by DJ. : 19th Jul 2017 at 8:32 PM. Reason: removed pic links
Oh, the first time I've seen there is a sticky about my problem, yay!

But I have a question. I'm stuck!

I have HP Pavilion G6, and it comes with Intel integrated and AMD Radeon HD 7450M dedicated graphics card.

Since I didn't notice that before, I've been running The Sims 2 on the Intel one the whole time (so, quick math, 3 months, approximately 3 hours a day, every day).

Ingefaer, thank you so much for your tutorial. You have made it very clear, and everybody could follow it. But it seems that I have some problems here, because I have AMD, not NVIDIA.

---

So, I open AMD control panel my right-clicking on desktop - there isn't one in the Control Panel. But, it looks quite alike the one OP pictured.

I'm stuck here:

[removed pic]

As you can see, I did set AL to be on High Performance (AMD card), but even when the game's on, it still can't handle shaders and all the other stuff AMD could handle. (And I went to "right-click on desktop>Set Resolution>Advanced" and it said "Intel HD Graphics Family" as the adapter.)

So, I tried following your tutorial, and at the 3D settings, the only thing I come up is this:

[removed pic]

I did try searching the whole control panel for it, but I didn't find anything alike to switch from Intel to AMD and vice versa.

When I right clicked on the tray icon, it only said this:

[removed pic]

---

When I first got the laptop, I only wanted AMD to be on (I didn't want Intel's GPU at all). So I booted into safe mode, and disabled Intel's display adapter, and 'successfully' enabled AMD's. When I normally booted my Windows, neither of the cards (or their drivers) worked properly and I had to reinstall both of them.

Gudging by the last image in my post, I think my computer doesn't recognize the AMD card/the card's driver. But I did go to Device Manager and there it was, Radeon HD 7450M, working properly.

---

I'm just saying, Intel's GPU does a pretty good job handling The Sims 2 on max settings (but without shaders and anti-aliasing though) and max resolution, but I'm thinking of buying The Sims 3 expansion packs and the last thing I want to do is burn my laptop with them.
Lab Assistant
Original Poster
#4 Old 17th Aug 2012 at 10:54 PM
I'm quite sad that i can't sit and play with the options myself - meaning that i know absolutely squat about AMD. I looked in my boyfriends computer, but being a Vaio it only has the AMD card (no switchable graphics) - which means that i couldn't recreate your problem.

I run Sims 2, with the same settings as I described above - just adding the latest pack (in my case Mansion and Garden). Works fine - so there should be a solution to your problem as well. I don't know whether AL is your newest pack (but i would guess so since it's the one you have added and you have no other stuff packs listed on your profile).

Have you tried to unassign the processor and ticking the box in the first picture? Does it prompt for the card when you run the application?

I assume your drivers are up to date - but what worries me is that your tray icon doesn't reckon your AMD card. Does the AMD card go in and take over if you play higher-end games?

As you say Intel does handle The Sims 2 - but if you consider running The Sims 3 packs (especially pets), using Intel it will likely result in crashes - and a lot of those.
Theorist
#5 Old 23rd Aug 2012 at 12:24 PM
Oh... okay then. I've already contacted HP Support for this, after reading on the internets that HP has slight problems with switchable graphics.

I'll see what I can do. Thanks for the tutorial!

DJ. who?
opin suomea, kerro mulle vitsi DM:ssä (ja ole valmis selittämään se)
Field Researcher
#6 Old 24th Aug 2012 at 4:17 PM
Why my game wont use nvidia? i tried it it worked for the first time but now it dont im sure i did all steps,its the 5th try and its still dont work
Test Subject
#7 Old 9th Oct 2012 at 2:19 AM
Quote: Originally posted by miss.pink
Why my game wont use nvidia? i tried it it worked for the first time but now it dont im sure i did all steps,its the 5th try and its still dont work


Do you use a laptop? Some mobile cards have a let-me-do-the-thinking-for-you feature that will make your system ditch the real card and use the intregrated one in an attempt to save batterypower when not hooked up to an outlet. It might still continue to do this even when hooked up, if 'batterylife mode' (or something like that) is enabled.
Test Subject
#8 Old 12th Nov 2012 at 6:38 AM
Does that only mean that I add The Sims 3 but not it's expansion packs?
I hope this works. *sweats*
Née whiterider
retired moderator
#9 Old 12th Nov 2012 at 10:21 AM
You would need to add TS3W.exe to do this for TS3.

What I lack in decorum, I make up for with an absence of tact.
Lab Assistant
#10 Old 21st Nov 2012 at 2:30 AM
I have AMD Radeon HD 7700 Series and when playing The Sims on my new windows 7 pc, this is what I get - http://www.takeshionline.com/test/Screenshot.bmp. Anyone know how to fix it so the beach comes back. Please. I miss the beach.
Site Helper
#11 Old 21st Nov 2012 at 2:48 AM
In general, we prefer that you keep your problem in one thread:
http://www.modthesims.info/showthread.php?t=491470

At this point, we don't even know whether you have an integrated graphics chip. If not, then this thread won't help you.
Lab Assistant
#12 Old 21st Nov 2012 at 10:46 AM
Sorry Mootila.
Scholar
#13 Old 2nd Dec 2012 at 3:54 AM
I had to do a couple of extra tweaks (in section 3 of the Nvidia control panel) before TS2 would use the NVIDIA card instead of the integrated Intel chip, but I can confirm that the information given in the OP is correct.

Obviously for TS2, it'll be a different .exe than for TS3, but the rest is the same (e.g. Sims2EP9.exe if your highest EP is M&G; your mileage may vary).

No need to use my full name, "Selly" will do just fine.
Lab Assistant
#14 Old 28th Dec 2012 at 4:06 AM Last edited by karnzter : 3rd Jan 2013 at 2:12 AM.
Thanks so much, Ingefaer! Your guide helped me get back the pretty water and terrain view for TS2. Still need to check TS3 since it was very late in the evening when I tried your guide.

(I just realized for The Sims Medieval I'll only use the .exe for Pirates and Nobles since I have that Adventure Pack so I nixed the question just now.)

(And the same procedures goes to Steam-based games. For those who want to know where to find the .exe files for the games, I'll refer you to this forum post from the Steam Users Forums. Full instructions is on post number four.)
Test Subject
#15 Old 13th Feb 2013 at 11:09 PM
Another suggestion for eliminating onboard graphics card-related crashes -- this is how I resolved my issue.

First, figure out the exact brand and model number of your motherboard. Go to the manufacturer's website for the manual for your motherboard if you don't still have it. Load this on another computer or other device for access while working on the bios or read it first for the exact instructions and write them down.

When your computer boots, there is a way to get into bios settings displayed on your screen. It is usually delete or F12, though it may be something else. If you have a big graphics splash screen when you boot, it's usually in a line right at the bottom of the screen.

Go into the bios. Look for a setting regarding enabling or disabling the onboard video. This is where the manual comes in -- a well-written manual will tell you what this setting is called. Set the setting to disabled. (Some will make you choose between the onboard and whatever other card(s) may be installed in your system; in this case you choose your better graphics card.)

Note: some older or cheaper motherboards used to turn the onboard graphics on or off by use of a physical jumper on the motherboard rather than a software setting. I had a motherboard a while ago that required me to either set or unset (I don't remember which) a particular jumper to turn off the onboard graphics.

Note 2: This method means that you will never be able to use the onboard graphics card, but it is a useful way to force your system to use the better video card if it's refusing to do so otherwise.
Field Researcher
#16 Old 4th Mar 2013 at 9:35 PM
The "select processor" option doesn't appear for me. Nor do the last two Desktop options. Why is this?

I have the newest GTX 550 Ti driver by the way.
Lab Assistant
Original Poster
#17 Old 5th Mar 2013 at 10:19 AM
Quote: Originally posted by JackieSmith
The "select processor" option doesn't appear for me. Nor do the last two Desktop options. Why is this?

I have the newest GTX 550 Ti driver by the way.


Do you have a laptop ? Because as far as i can see, the graphics card you mention is for stationary computers - And, as far as i know, the issue with several graphics cards is primarily for laptops (Someone, correct me if this is wrong )

If you do have several graphics cards in your stationary, look at the suggestion that miricats made (:
Your usermanual is this one: http://www.nvidia.com/content/gefor..._User_Guide.pdf
Field Researcher
#18 Old 6th Mar 2013 at 9:00 AM
Quote: Originally posted by Ingefaer
Do you have a laptop ? Because as far as i can see, the graphics card you mention is for stationary computers - And, as far as i know, the issue with several graphics cards is primarily for laptops (Someone, correct me if this is wrong )

If you do have several graphics cards in your stationary, look at the suggestion that miricats made (:
Your usermanual is this one: http://www.nvidia.com/content/gefor..._User_Guide.pdf


Yeah except I can't make any sense of it...

I actually wanna do the opposite, switch from my GeForce to my incorporated GPU.
Field Researcher
#19 Old 16th Mar 2013 at 12:07 AM
I've been having video card issues and want to use these instructions to verify which card my system is using. The problem is i'm not getting the option to choose the preferred graphics processor as posted in the OP's third picture under manage 3D settings.

My computer is an alienware desktop. My graphics card is NVidia GeForce GTX 295. I have 2 of those cards but took one out because of some problems, which made games run better but not better than when i had both cards in and they were working right. My OS is Windows 7 Ultimate 64 bit.

I've done some research but not finding any answers to my particular problem. Which is why am i not getting the option to choose the preferred graphics processor. Any help is appreciated.
Test Subject
#20 Old 22nd Mar 2013 at 3:23 AM
Easier way to choose between cards : Windows 7
I also have 2 graphics cards: the integrated Intel HD card and a second card the Radeon HD 6770m. Unfortunately, Ingefaer's instructions were a bit confusing as I could not find the control panel for my second card! After checking the HP website (manufacturer of my computer), I found these instructions! Much easier to do!!!

Right clicking anywhere on the desktop opens a menu with various options that includes the option to "Configure switchable graphics" (second option from the top). After selecting this, another window opened for the Radeon which allowed me to designate that card for whatever programs I wanted. I also found a check box in this window that would "show a pop up warning for unassigned applications". The next time I ran The Sims 2, this box opened and let me designate the better graphics card for the game! YEAH!!!!

I hope this will help others with the same issue... and is much easier to do!
Good luck to all!

Karen




Quote: Originally posted by Ingefaer
I have used about 30 hours these last weeks, on trying to get my Sims 3 game to run. It has been crashing within the first half an hour of gameplay
I've been trying to analyse the crashlogs, and finally i came down to one problem. "Insuficcient graphics capability: Upgrade your graphicscard or get it checked out for instablity".

And i didn't quite understand it, because i do have two graphicscards in my computer. An integrated (Intel HD) and another (NVIDIA). So i searched the internet and came up with this solution, and since it wasn't easy to find, I'll share it with you (:

Guide to make your computer use another graphicscard (For NVIDIA at least.)

Step 1.
Search for the control panel of your second graphics card. (In my case i type Nvidia)


Step 2:
Choose "Manage 3D Settings."


Step 3:
Choose "Program Settings"


Step 4:
Press add, and find TS3W
(This is found here:
32-bit Windows: C:\Program Files\Electronic Arts\The Sims 3\Game\Bin
64-bit Windows: C:\Program Files (x86)\Electronic Arts\The Sims 3\Game\Bin)
Source: http://simswiki.info/wiki.php?title...Prevention/TS3W

Step 5:
Notice how the computer has selected the integrated graphics card as the global setting. Change this to the right card (In this case the High Performance NVIDIA Processor)


Step 6:
Done (: Play your game.


Optional:
If you want to make sure that it runs correctly - Add a tray icon under "Desktop" -> "Display GPU activity icon in notification area"

Then you will get an icon looking like this:

(It will be in greytones when not using the card, and in colors when a program is using it)

Then when you open Sims 3 you can be able to press that tray icon and it will look like this.


Please take in mind that this is not the whole solution to the crashes. Mine doesn't crash as often anymore, but crashes can still occur.

I hope this will help someone (If this can help just one person i would be happy) (: I can't help with your specific graphics crash, but there will probaly be a solution to this aswell. Keep looking, or try if there is a similiar option on your graphics card.

Happy Simming.
Test Subject
#21 Old 31st Mar 2013 at 11:09 AM
THANK YOU SO SO SO SO MUCH! You saved my Easter I had Vista till few weeks but my Laptop was damaged and my insurance gave me a new windows 8 one. I was already desperate because it ALWAYS crashed, when i wanted to make a Family. And now...I tried it and it worked!
Test Subject
#22 Old 1st Apr 2013 at 12:42 AM
If you have two graphic cards , you can try BIOS setting and set the default to your best card instead of integrated card.
Check on your motherboard manual for details.
Lab Assistant
#23 Old 15th Jun 2013 at 2:18 AM
The AMD switchable graphics didnt work for me I have intel 4000HD and AMD Radeon graphics card...
Test Subject
#24 Old 16th Jun 2013 at 1:27 AM Last edited by miricats : 16th Jun 2013 at 1:27 AM. Reason: grammar
Hi again!

I wrote my post above (#15) based on making my and my husband's desktop computers run sims3 correctly at the time; our desktop motherboards needed to be told to turn off the onboard graphics.

I have since upgraded both of our motherboards (mine due to being on a 7-year-old cpu, his due to broken sound on his mobo), and the new BIOS for both boards does not have a setting to turn off the onboard graphics; however, both nvidia control panels don't show an option to select graphics cards.

Just checking: do newer desktop motherboards auto-detect dedicated video cards and turn off the onboard graphics? 'Cos if not then something is behaving rather wrong -- even the System control panel's Device Manager only sees one video card on each computer.

Just checking this with others who keep more up-to-date on general info.

Thank you!
Field Researcher
#25 Old 16th Jun 2013 at 4:06 AM
Quote: Originally posted by miricats
Hi again!

I wrote my post above (#15) based on making my and my husband's desktop computers run sims3 correctly at the time; our desktop motherboards needed to be told to turn off the onboard graphics.

I have since upgraded both of our motherboards (mine due to being on a 7-year-old cpu, his due to broken sound on his mobo), and the new BIOS for both boards does not have a setting to turn off the onboard graphics; however, both nvidia control panels don't show an option to select graphics cards.

Just checking: do newer desktop motherboards auto-detect dedicated video cards and turn off the onboard graphics? 'Cos if not then something is behaving rather wrong -- even the System control panel's Device Manager only sees one video card on each computer.

Just checking this with others who keep more up-to-date on general info.

Thank you!


Are you sure, that your new motherboards really have onboard graphics? I mean they are part of the motherboard, aren´t they? So you took the old onboard graphics out of the system when you got rid of the old motherboard. Or I completely misunderstood what onboard grahpics means.
Page 1 of 2
Back to top