2-Step Foundation DIY Starter Pack ~ 7 Lot Sizes To Build On, Already Grid-Adjusted

3X3 Lot FIXED on March 28, 2023 (Thank you, Softlism for reporting the issue) - the ground was not perfectly level on the right side. Gah! ...anyway - fixed now, and all files are updated.

Have you ever wanted to build your own house with a cute little 2-Step Foundation, but didn't want to use the Grid-Adjuster? Well... now you can! No CFE or Grid-Adjusting necessary.

This DIY Starter Pack has 7 different house-sized lots, for you to build-your-own house on.
Each lot is oriented so the sun is in front. They can also be used for Apartments, Community, and other lots too, if you rezone them with the cheat: changeLotZoning.


The Lot sizes are:
1X1 - shrunk with Moo's Lot-Adjuster
1X2 - shrunk with Moo's Lot-Adjuster
2X1 - shrunk with Moo's Lot-Adjuster
2X2
2X3
3X2
3X3

They have been cleaned/compressed with Chris Hatch's Lot Compressor.

They have easily identifiable custom thumbnails too.

WARNING: Be very careful when removing the foundation. The "undo" button is your friend! If you remove a section of the foundation, then decide later that you want it back... you will need to use the Grid-Adjuster to do so. Also, do not remove the foundation while CFE is activated.

Remember - Large dogs are going to need Simler90's Stair Mods to be able to access these 2-Step foundations.

Downloading the files:
- Each of the 7 lots is available as separate installable sims2pack files. Install them as you would normally install a downloaded lot.
- AND/OR (You can use both if you'd like) use the 'ALL_PutInLotCatalog' option. Unzip and place these lot files into your Lot Catalog folder, and use them over and over again.

If you would like other lot sizes - just let me know in the comments, I'll be happy to make them.

Have fun building!