Sign in to Mod The Sims
#51
1st Oct 2011 at 3:19 AM
1st Oct 2011 at 3:19 AM
I now exported the 0x90624C1B file, and tried to open it in s3pe, but simply got an error message 'Could not open package'.
'Hit unexpected end of file at 0'
I've included the imported files from my world, if they'd shed any light to this. The 906 is the one I edited in the world file.
'Hit unexpected end of file at 0'
I've included the imported files from my world, if they'd shed any light to this. The 906 is the one I edited in the world file.
Attached files:
 |
ImportedFiles.rar (695 Bytes, 43 downloads) - View custom content | |
#52
1st Oct 2011 at 3:59 AM
1st Oct 2011 at 3:59 AM
Try the file I attached to this post, Arisuka. It works in my world, but your water level is tiny- so it's wasy to miss!
It's that little blue line, is it meant to be that small? Little stream, perhaps?
I ticked the 'force one tile' box in Zaide_Chris' tool.
It's that little blue line, is it meant to be that small? Little stream, perhaps?
I ticked the 'force one tile' box in Zaide_Chris' tool.
Attached files:
 |
Ari Water Levels.zip (643 Bytes, 36 downloads) - View custom content | |
#53
1st Oct 2011 at 4:24 AM
1st Oct 2011 at 4:24 AM
#54
1st Oct 2011 at 4:27 AM
1st Oct 2011 at 4:27 AM
Hooray! 
I noticed that sometimes very narrow strips need to be forced to one tile, but you might find that you don't need that if you make it wider.
I noticed that sometimes very narrow strips need to be forced to one tile, but you might find that you don't need that if you make it wider.
#55
1st Oct 2011 at 4:52 AM
1st Oct 2011 at 4:52 AM
#56
1st Oct 2011 at 4:57 AM
1st Oct 2011 at 4:57 AM
Flip them around, so that you have the smallest coordinates first. So you're really describing the other two corners to the ones you have marked x1, x2 in your image.
So,
x1 1491.41931
z1 240.9882
x2 1647.04126
z2 399.825256
y 83.3251
Zaide_Chris' tool also rounds the figures down, so you can do that yourself (or round up) to save inputting all of those decimal places if you like! So x1 1491, z1 240 etc.
ETA- Well done, you got it! I was too slow typing!
So,
x1 1491.41931
z1 240.9882
x2 1647.04126
z2 399.825256
y 83.3251
Zaide_Chris' tool also rounds the figures down, so you can do that yourself (or round up) to save inputting all of those decimal places if you like! So x1 1491, z1 240 etc.
ETA- Well done, you got it! I was too slow typing!
#57
12th Nov 2011 at 2:53 PM
12th Nov 2011 at 2:53 PM
#58
13th Nov 2011 at 10:46 PM
13th Nov 2011 at 10:46 PM
I'm glad it worked for you, Miuki! Sandrine and Zaide_Chris' toold work brilliantly.
I hope Chris will fix the tool to work in Firefox too, I have been using Chrome to make it work. A standalone version would be even better!
I hope Chris will fix the tool to work in Firefox too, I have been using Chrome to make it work. A standalone version would be even better!
Original Poster
#59
17th Nov 2011 at 2:59 AM
17th Nov 2011 at 2:59 AM
#60
19th Nov 2011 at 8:10 PM
19th Nov 2011 at 8:10 PM
simsample Definetly!
zaide_chris Hooray! Thank you very much for not abandoning humble Firefox users. I've downloaded Chrome just to get your tool to work fully.
zaide_chris Hooray! Thank you very much for not abandoning humble Firefox users. I've downloaded Chrome just to get your tool to work fully.
#61
19th Nov 2011 at 8:43 PM
19th Nov 2011 at 8:43 PM
Thanks for that, zaide_chris- it's good to know you're still supporting this!
#62
31st Dec 2011 at 10:57 AM
31st Dec 2011 at 10:57 AM
#63
31st Dec 2011 at 7:13 PM
31st Dec 2011 at 7:13 PM
I'm getting it too, I hope it will be back again soon! 
I'll PM Zaide_Chris.
I'll PM Zaide_Chris.
#64
31st Dec 2011 at 7:35 PM
31st Dec 2011 at 7:35 PM
Ok, cool Simsample, thanks.
I was just about to start making a stream for the West world when I noticed this. Oh well, I'll just have to play more Jericho while waiting
I was just about to start making a stream for the West world when I noticed this. Oh well, I'll just have to play more Jericho while waiting
#65
31st Dec 2011 at 9:42 PM
31st Dec 2011 at 9:42 PM
Whilst I'm quite happy for you to play MORE KIMI RAIKKONEN in Jericho, you could always download Sandrine's tool instead to try it. Similar to Chris' but it is a stand alone program.Newest version in this post:
http://www.modthesims.info/showpost...56&postcount=25
Be sure to use INTEGERS (whole numbers) for the co-ordinates; so use 1234 instead of 1233.999998 (although I notice Sandrine mentions she floored the inputs, I haven't tested it recently).
Edited to add: I notice that someone asked about changing the water direction in a previous post; I managed to do this with Jericho!
Original Poster
#66
2nd Jan 2012 at 9:21 AM
Last edited by zaide_chris : 2nd Jan 2012 at 9:44 AM.
2nd Jan 2012 at 9:21 AM
Last edited by zaide_chris : 2nd Jan 2012 at 9:44 AM.
#67
2nd Jan 2012 at 9:37 AM
2nd Jan 2012 at 9:37 AM
Original Poster
#68
2nd Jan 2012 at 7:06 PM
2nd Jan 2012 at 7:06 PM
#69
2nd Jan 2012 at 7:26 PM
2nd Jan 2012 at 7:26 PM
Thank you! Will look in to it tomorrow
#70
3rd Jan 2012 at 7:38 PM
3rd Jan 2012 at 7:38 PM
#71
3rd Jan 2012 at 8:12 PM
Last edited by armiel : 3rd Jan 2012 at 8:24 PM.
3rd Jan 2012 at 8:12 PM
Last edited by armiel : 3rd Jan 2012 at 8:24 PM.
OK, I have no idea if this is related, but after importing a new waterplane made with the tool in new location, I can't open my world anymore.
I attached my waterplanes and the resource file, the instance 1 is the new one I made, the other two files work.
When I try to load my world with all 3 files included, caw says it's unable to load the world cause it was trying to divide it with a 0. Sorry I don't have an exact error since all my stuff is in finnish.
If I just made a mistake with the values, that's good, but i thought to post this incase the tool got broken somehow.
Thank you for all your hard work with this Chris!
Edit
A warning to any person who downloads the files below to snoop around them - they may break the world to a state it's not repairable anymore. Handle with caution and do not import to a world you care for (happened to me, hoping it doesn't happen to you) I was stupid not to back up first so breaking my world was my fault only, and while I could resurrect my world from an older back up, I lost a lot of work done.
I attached my waterplanes and the resource file, the instance 1 is the new one I made, the other two files work.
When I try to load my world with all 3 files included, caw says it's unable to load the world cause it was trying to divide it with a 0. Sorry I don't have an exact error since all my stuff is in finnish.
If I just made a mistake with the values, that's good, but i thought to post this incase the tool got broken somehow.
Thank you for all your hard work with this Chris!
Edit
A warning to any person who downloads the files below to snoop around them - they may break the world to a state it's not repairable anymore. Handle with caution and do not import to a world you care for
(happened to me, hoping it doesn't happen to you) I was stupid not to back up first so breaking my world was my fault only, and while I could resurrect my world from an older back up, I lost a lot of work done.
Attached files:
| |
waterplane.rar (2.9 KB, 40 downloads) - View custom content | |
Original Poster
#72
3rd Jan 2012 at 8:29 PM
3rd Jan 2012 at 8:29 PM
#73
3rd Jan 2012 at 8:32 PM
Last edited by armiel : 3rd Jan 2012 at 8:45 PM.
3rd Jan 2012 at 8:32 PM
Last edited by armiel : 3rd Jan 2012 at 8:45 PM.
#74
13th Jan 2012 at 5:26 AM
13th Jan 2012 at 5:26 AM
Hi there,
When I tried yesterday I had the unable to divide by 0 error too.
I used Ari water levels from post #52 to see if it was my game but they came out fine.
I had used IE9 with Chris's tool then Firefox and still got the error.
I next moved to try it with Sandrine's tool and (after sorting a hex editor thing) it all loaded up fine.... well I didn't get the divide by 0 error.
What I did fine was that with my 16 water planes... [16 planes to make up my river system flowing down a hill side]... I couldn't get the last on to show up (the 'F' plane - or last file) unless I set the 0x90624C1B file to a byte of 10 (I presume it should be '0F' for my 16 planes).
And another annoying thing is that saving and reloading doesn't seem to be changing the opacity and deleting the overhang.... but I can live with that, because at least the world has its water planes now.
When I tried yesterday I had the unable to divide by 0 error too.
I used Ari water levels from post #52 to see if it was my game but they came out fine.
I had used IE9 with Chris's tool then Firefox and still got the error.
I next moved to try it with Sandrine's tool and (after sorting a hex editor thing) it all loaded up fine.... well I didn't get the divide by 0 error.
What I did fine was that with my 16 water planes... [16 planes to make up my river system flowing down a hill side]... I couldn't get the last on to show up (the 'F' plane - or last file) unless I set the 0x90624C1B file to a byte of 10 (I presume it should be '0F' for my 16 planes).
And another annoying thing is that saving and reloading doesn't seem to be changing the opacity and deleting the overhang....
but I can live with that, because at least the world has its water planes now.
#75
20th Jan 2012 at 12:02 AM
20th Jan 2012 at 12:02 AM
Hi, everyone!
I'm having trouble getting the water plains to show up, and I'm getting pretty frustrated. I was hoping someone here could help? (:
It seems like I've tried about two dozen+ different coordinates, including some I saw posted by zaide_chris on the first page. I've used a Y coordinate that is be higher than all of the land I have in my world (but still within the height limits) so that the middle of the plain definitely isn't under ground. The X and Z coordinates I was using are also within the limits of the map (it's the largest, if it matters). Still, none of them are showing up!
Then, I downloaded and used the file Pistachio attached to her post (for the 707CA200_blabla file only), and, HALLELUJAH, it worked. However, they're not the right coordinates for me, so I can't actually use it.
But anyway, that makes me assume that it's not a problem with the 90624C1B_blabla file, but with the 707 one. Right...? (As you can see, I'm clueless.)
I've attached the files I tried using last, which of course didn't work, otherwise I probably wouldn't be posting here. (:
Am I just typing in bad coordinates? What am I doing wrong?
I'm having trouble getting the water plains to show up, and I'm getting pretty frustrated. I was hoping someone here could help? (:
It seems like I've tried about two dozen+ different coordinates, including some I saw posted by zaide_chris on the first page. I've used a Y coordinate that is be higher than all of the land I have in my world (but still within the height limits) so that the middle of the plain definitely isn't under ground. The X and Z coordinates I was using are also within the limits of the map (it's the largest, if it matters). Still, none of them are showing up!
Then, I downloaded and used the file Pistachio attached to her post (for the 707CA200_blabla file only), and, HALLELUJAH, it worked. However, they're not the right coordinates for me, so I can't actually use it.
But anyway, that makes me assume that it's not a problem with the 90624C1B_blabla file, but with the 707 one. Right...? (As you can see, I'm clueless.)
I've attached the files I tried using last, which of course didn't work, otherwise I probably wouldn't be posting here. (:
Am I just typing in bad coordinates? What am I doing wrong?
Attached files:
| |
plains.zip (1.7 KB, 34 downloads) - View custom content | |
|
|