Alternate Simbot Heads + Body (Male)
SCREENSHOTS
Downloaded 9,102 times
285 Thanks
52 Favourited
72,360 Views
Say Thanks!
Thanked!
Author wintermuteai1
Uploaded: 18th Jun 2010 at 4:33 AM
Updated: 18th Jun 2010 at 6:23 PM
Updated: 18th Jun 2010 at 6:23 PM
For Ambitions I present to you "The Simbot Junkyard"
This is for male simbots 4 new looks for your male simbot. Plus an alternate simbot body. The new body is a re-mesh & retexture that gets rid of the "drawn on" handle and tubes on the front of the simbot's body. Now there is a meshed handle.
I also created new simbot heads, First there is one that is basically like the normal simbot, except the jaw has been completely re-done so as to be less "clunky". There are also 3 variations of a "cyclops" type
simbot. One is more like the Servo eye, so it actually seems more like a predecessor to the Servo, the other two use the default looking eye but version one is set in the normal spot in the face but center, while the other version is higher on the face. There was a strange texture glitch in CAS with the Servo type cyclops head but it does not show in game so I am uncertain if it's just on my end. Please let me know if you have any problems.
In order to use the new servo heads & body you MUST use some sort of debug enabler mod. I suggest NRass one here:
http://ts3.tscexchange.com/index.php?topic=3857
or you can use AM or whatever your favorite flavor.
once using such a mod just use edit sim in cas, or "change appearance" and you will see the new heads in hair/hats.
Polygon Counts:
S3T-Alternate-Simbot-Head-Male - 1082 poly
S3T-Alternate-Simbot-Head-Male-Cyclops - 718 poly
S3T-Alternate-Simbot-Head-Male-Cyclops V2 - 718 poly
S3T-Alternate-Simbot-Head-Male-Servo-Type - 522 poly
Wintermute-Alternate-Simbot-Body-Male - 4328 poly
These are Non-Replacement
You must use a Debug enabler mod to use these items.
Heads will be in Hair/Hats
Body will be in Everyday
Age - Ambitions Simbots items are all "Elder"
Gender - Male
Recolorable channels:
recolorable channels and their locations:
Heads: (3) Main/Whole head and jaw area, "knobs", and little door on back of the head.
Body: (4)Main Body area, Joints(elbows,ankles,knees),Door on front of simbot,and "screw" areas (such as waist and other areas looking like some sort of screw)
This information by request of Moderators.
Additional Credits:
EA
TSRW
Inge & Peter Jones for S3PE & S3OC
This is for male simbots 4 new looks for your male simbot. Plus an alternate simbot body. The new body is a re-mesh & retexture that gets rid of the "drawn on" handle and tubes on the front of the simbot's body. Now there is a meshed handle.
I also created new simbot heads, First there is one that is basically like the normal simbot, except the jaw has been completely re-done so as to be less "clunky". There are also 3 variations of a "cyclops" type
simbot. One is more like the Servo eye, so it actually seems more like a predecessor to the Servo, the other two use the default looking eye but version one is set in the normal spot in the face but center, while the other version is higher on the face. There was a strange texture glitch in CAS with the Servo type cyclops head but it does not show in game so I am uncertain if it's just on my end. Please let me know if you have any problems.
In order to use the new servo heads & body you MUST use some sort of debug enabler mod. I suggest NRass one here:
http://ts3.tscexchange.com/index.php?topic=3857
or you can use AM or whatever your favorite flavor.
once using such a mod just use edit sim in cas, or "change appearance" and you will see the new heads in hair/hats.
Polygon Counts:
S3T-Alternate-Simbot-Head-Male - 1082 poly
S3T-Alternate-Simbot-Head-Male-Cyclops - 718 poly
S3T-Alternate-Simbot-Head-Male-Cyclops V2 - 718 poly
S3T-Alternate-Simbot-Head-Male-Servo-Type - 522 poly
Wintermute-Alternate-Simbot-Body-Male - 4328 poly
These are Non-Replacement
You must use a Debug enabler mod to use these items.
Heads will be in Hair/Hats
Body will be in Everyday
Age - Ambitions Simbots items are all "Elder"
Gender - Male
Recolorable channels:
recolorable channels and their locations:
Heads: (3) Main/Whole head and jaw area, "knobs", and little door on back of the head.
Body: (4)Main Body area, Joints(elbows,ankles,knees),Door on front of simbot,and "screw" areas (such as waist and other areas looking like some sort of screw)
This information by request of Moderators.
Additional Credits:
EA
TSRW
Inge & Peter Jones for S3PE & S3OC
This is a new mesh, and means that it's a brand new self contained object that usually does not require a specific Pack (although this is possible depending on the type). It may have Recolours hosted on MTS - check below for more information.
MTS has all free content, all the time. Donate to help keep it running.
simbotheads.zip
| Alternate Simbot Heads(Male)
Download
Uploaded: 18th Jun 2010, 8.71 MB.
5,725 downloads.
|
||||||||
Wintermute-Alternate-Simbot-Body-Male.zip
| Alternate Simbot Body(Male)
Download
Uploaded: 18th Jun 2010, 8.43 MB.
6,186 downloads.
|
||||||||
For a detailed look at individual files, see the Information tab. |
Install Instructions
Quick Guide:
1. Click the file listed on the Files tab to download the file to your computer.
2. Extract the zip, rar, or 7z file. Now you will have either a .package or a .sims3pack file.
For Package files:
1. Cut and paste the file into your Documents\Electronic Arts\The Sims 3\Mods\Packages folder. If you do not already have this folder, you should read the full guide to Package files first: Sims 3:Installing Package Fileswiki, so you can make sure your game is fully patched and you have the correct Resource.cfg file.
2. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).
For Sims3Pack files:
1. Cut and paste it into your Documents\Electronic Arts\The Sims 3\Downloads folder. If you do not have this folder yet, it is recommended that you open the game and then close it again so that this folder will be automatically created. Then you can place the .sims3pack into your Downloads folder.
2. Load the game's Launcher, and click on the Downloads tab. Find the item in the list and tick the box beside it. Then press the Install button below the list.
3. Wait for the installer to load, and it will install the content to the game. You will get a message letting you know when it's done.
4. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).
Extracting from RAR, ZIP, or 7z: You will need a special program for this. For Windows, we recommend 7-Zip and for Mac OSX, we recommend Keka. Both are free and safe to use.
Need more help?
If you need more info, see:
1. Click the file listed on the Files tab to download the file to your computer.
2. Extract the zip, rar, or 7z file. Now you will have either a .package or a .sims3pack file.
For Package files:
1. Cut and paste the file into your Documents\Electronic Arts\The Sims 3\Mods\Packages folder. If you do not already have this folder, you should read the full guide to Package files first: Sims 3:Installing Package Fileswiki, so you can make sure your game is fully patched and you have the correct Resource.cfg file.
2. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).
For Sims3Pack files:
1. Cut and paste it into your Documents\Electronic Arts\The Sims 3\Downloads folder. If you do not have this folder yet, it is recommended that you open the game and then close it again so that this folder will be automatically created. Then you can place the .sims3pack into your Downloads folder.
2. Load the game's Launcher, and click on the Downloads tab. Find the item in the list and tick the box beside it. Then press the Install button below the list.
3. Wait for the installer to load, and it will install the content to the game. You will get a message letting you know when it's done.
4. Run the game, and find your content where the creator said it would be (build mode, buy mode, Create-a-Sim, etc.).
Extracting from RAR, ZIP, or 7z: You will need a special program for this. For Windows, we recommend 7-Zip and for Mac OSX, we recommend Keka. Both are free and safe to use.
Need more help?
If you need more info, see:
- For package files: Sims 3:Installing Package Fileswiki
- For Sims3pack files: Game Help:Installing TS3 Packswiki
Also Thanked - Users who thanked this download also thanked:
Packs Needed
For a full list of packs with names, see the Packs Needed popup.
Tags
Packs Needed
Base Game | |
---|---|
Sims 3 |
Expansion Pack | |
---|---|
Ambitions |
More Downloads BETA
Also Thanked - Users who thanked this download also thanked:
by nanashihito
by Celebriton